Conmed System 2450

Dimensions

• Height: 7 in (18cm)
• Width:14.4 in (37 cm)
• Depth: 21.5 in (48 cm)
• Weight: 32 lb (14.5 kg)

Operation

• Intermittent 15 Sec on/30 Sec off.

Power Display Accuracy

• The greater of 2% of the maximum power setting for the selected mode or 15% of the selected power setting.

Line regulation

• Power Change < l %/V for the range of line voltages specified.

Environmental

• Operating Conditions: l0°C to 30°C, 95% RH Non-condensing maximum at altitudes from -60 meters to 3050 meters above mean sea level.
• Degree of protection against Ingress of Water: IPXl (Protection against vertically falling water drops).
• Mounting Restriction: 2-inch (5cm) clearance required on each side, back, and above the ESU for cooling. Cooling: Natural convection, conduction, and radiation.
• Storage Conditions: -34°C to 65°C, at altitudes from -60 to +4500 meters above mean sea level (1020.5hPa -577.l hPa) when sealed in an original polybag, packing material, and shipping carton.
• Before shipment or storage, the ESU should be enclosed and sealed in a polyethylene bag and placed inoriginal carton using original packaging materials.
• RF Leakage: <100 mA per 1EC60601-2-2: 1998, Clause 19.3.lOlb.

Audio

• Cut = 523 Hz
• Coag = 440 Hz
• Bipolar = 440 Hz
• Ace Fault = 847 Hz (pulsating)
• Dispersive Electrode Alarm = 847 Hz (pulsating)
• Err Fault = 847 Hz (pulsating)
• Increase Power Level = 3 79 Hz
• Decrease Power Level = 343 Hz

Power

• Power Output – Cut Mode: 1100V
• Power Output – Blend Mode: 1200V
• Power Output – Coagulation Mode: 3200V
• Power Output – Fulguration Mode: 5000V
• Power Output – Bipolar Mode: Micro -150V, Macro – 560V

General

• Output Control System: Dynamic Response
• Previous Setting Memory: Yes
• Contact Quality Monitoring System (CQM): ARM
• CQM Range: 10-150 Ohms
• Self Diagnosis: Yes
• Technology: Isolated RF Output
• Duty Cycle: 15 Seconds On, 30 Seconds Off
• Output configurations: Dynamic Response Technology
• Cooling method: Convection